OpenGear
From Wikked
OpenGear serial connector pinouts information, by Will Hargrave (thanks!)
Contents |
Console adaptors
3 kinds:
- DB9-RJ45 319000 - uncrossed - e.g. Foundry devices
- DB9-RJ45 319001 - 3Com/Extreme/PCs
- RJ45 M-F 449016 - Black cisco dongle. Use at the Cisco end, with a standard patch cable
Pinout
Opengear
| PIN | SIGNAL | DEFINITION | DIRECTION |
|---|---|---|---|
| 1 | RTS | Request To Send | Output |
| 2 | DSR | Data Set Ready | Input |
| 3 | DCD | Data Carrier Detect | Input |
| 4 | RXD | Receive Data | Input |
| 5 | TXD | Transmit Data | Output |
| 6 | GND | Signal Ground | NA |
| 7 | DTR | Data Terminal Ready | Output |
| 8 | CTS | Clear To Send | Input |
Cisco console
| Pin | Signal | Input/Output |
|---|---|---|
| 2 | DTR | Output |
| 3 | TxD | Output |
| 4 | GND | - |
| 5 | GND | - |
| 6 | RxD | Input |
| 7 | DSR | Input |
Cisco - Opengear cable
Remember to label which end is which!
| Cisco | Purpose | Opengear |
|---|---|---|
| 3 | TxD | 4 |
| 4 or 5 | GND | 6 |
| 6 | RxD | 5 |
Just crimp with:
4 - green/white 5 - green 6 - blue
...and use this end on the OpenGear side
568B colourcode
| 1 | wh/or |
| 2 | or |
| 3 | wh/grn |
| 4 | blu |
| 5 | wh/blu |
| 6 | grn |
| 7 | wh/brn |
| 8 | brn |
Typical DB9/DB25 shell adaptor colour code
| 1 | blue |
| 2 | orange |
| 3 | black |
| 4 | red |
| 5 | green |
| 6 | yellow |
| 7 | brown |
| 8 | white |
DB25 shell for 7200-opengear with straight thru cable
will needs to check this but should be ok:
| RJ45 Pin | Shell Colour | DB25 pin |
|---|---|---|
| 4 | red | 3 |
| 5 | green | 2 |
| 6 | yellow | 7 |
<will-h> Typical type of adaptor used is http://uk.farnell.com/1192758/connectors/product.us0?sku=spc-technology-spc19789 <will-h> well, the male equivalent of that one in fact :) <will-h> it's cisco to opengear where i get annoyed, cut a cat5 cable in half and just recrimp with the 3 appropriate colours
